A Pulse Oximeter is a medical device that is used to measure the oxygen saturation in the blood and the heart rate of the person. Even if there is any slight change in the oxygen level in the body, it can be detected by this non-invasive device. It is clip-like medical equipment that is attached to the finger or toe and is small in size.
Earlier, it was used only in hospitals or emergency rooms but now due to the pandemic of Covid-19, it can be found in almost all the households in urban areas. With a good quality oximeter, early signs of lowering of oxygen saturation by the virus can be detected.
Here, we have listed some best Pulse Oximeters to check oxygen saturation and heart rate monitor and among these, you can select one for yourself.
Top 9 Best Pulse Oximeter in India
1. Dr Trust Signature Series Fingertip Pulse Oximeter With Audio Visual Alarm
Dr Trust is a leading brand of medical equipment which are trusted by doctors, health professionals, and home users. The oximeter by Dr Trust is affordable and accurate in checking arterial blood oxygen saturation level (SpO2) and pulse rates. With this, the readings can be obtained within 6 seconds and when it is removed from the finger, it shuts down automatically.
People of all age groups can use it and can be used even for pediatric care at home and in hospitals.
It is used on a large scale in hospitals, clinics, and homes as its readings are always accurate. This device helps in recording the vital signs of patients with respiratory issues like COPD, asthma, COAD, etc.
It even indicates Perfusion Index (PI) which is the pulse strength at the sensor site.
With this device, you can know about your asthma trigger and thus, can prevent hypoxia which is the condition in which the level of oxygen saturation drops suddenly. This condition is faced by athletes, skiers, pilots, and other people who go to high-altitude areas.
This device has a compact, small, and innovative design and has a wide dual-color and multi-directional OLED display. It has eight modes to display PR pulse and SpO2.
Since it is made of high-quality ABS material, it is durable. It is anti-allergic even for those with sensitive skin as the inner finger chamber is made up of hypoallergenic latex-free material.
Its use is painless as the fingertip clip is soft and suitable for a wide range of finger sizes.
When it is not used, it shuts off automatically which helps in consuming less power. For it, two AAA batteries are required and when the battery becomes low, it is indicated.
2. Beurer PO30 Pulse Oximeter
Beurer PO30 pulse oximeter is used to monitor the pulse rate and SpO2 level of an individual and is lightweight. It attaches to the fingertip without producing any pain and is a non-invasive tool.
The results produced by this device are accurate and precise. Due to its compact size, it can be used for everyday routines.
It can be used for all age groups and is compact. It is a battery-operated device and requires 2 AAA batteries. When the battery becomes low, it is indicated by the low battery indicator. After obtaining the result, when the finger is removed, it powers off automatically and thus, is energy efficient.
A LED screen is present to display the readings clearly with vibrant colors.
It is durable as the device is made up of high-quality material. The fingertip clip can be used on various finger sizes as it is flexible and simple to use. Due to its small size, it is convenient to carry while traveling as well.
3. BPL Smart Oxy Fingertip Pulse Oximeter
BPL Limited has been delivering good quality measuring instruments in the field of medical technology.
BPL Smart Oxy fingertip pulse oximeter can display SpO2 and has 6 modes with four direction display. It can be used for adults as well as for kids.
It can be used to measure pulse rate, blood oxygen levels, and perfusion index.
The results are displayed on a color OLED screen and have configured alarms that provide visual clarity and convenience to the users. With the audible alarm indication alerts, hi/low measurement readings can be known.
Since it is portable, it can be carried easily. This device is battery operated and is equipped with 2 AAA batteries. It has a user-friendly design. When not in use, it powers off automatically and the battery life is about 20 hours.
4. HealthSense Accu-Beat FP 910 Fingertip Pulse Oximeter
HealthSense Accu-Beat Fingertip pulse oximeter is a useful device to measure pulse rate & oxygen saturation.
Along with measuring SpO2 and pulse rate, it can also be used to record Perfusion Index and Plethysmograph.
The finger chamber is made up of medical-grade silicone which is latex and allergen-free and thus, the user does not get any microbial reactions while measuring. It can be used on any finger size.
One button is present which operates all and even helps in setting alarm with sound features.
If the device is not in use for 8 seconds, it powers off automatically due to the presence of the feature of Auto Sleep Mode.
The readings are measured accurately and displayed clearly on a two-coloured, four-direction OLED screen with optical detection technology.
This device has a 1-year offsite service warranty.
5. Newnik Fingertip Pulse Oximeter – PX701
The PX701 pulse oximeter is a high-quality product provided by the brand and is affordable which can be used to measure blood oxygen saturation levels (SpO2) and pulse rate.
In case the SpO2 and pulse rate indicated are beyond the preset limits, an alert is indicated by the buzzer alarm.
It is present with a rotatable OLED screen on which readings are displayed, enhancing the user’s experience.
It can be used to measure the pulse strength as well and the latest plethysmograph waveform technology is present in it.
Since it is US FDA approved, its accuracy and reliability meet international quality standards. This makes it highly effective and efficient.
The standard SpO2 and PR values are present in it and if these values of a user fall below, it will warn the user with an alarm.
The fingertip chamber is designed to suit all age groups. It is a battery-operated device and requires 2 AAA batteries which are provided with the device.
It has the feature of Auto On & Off. When the finger is inserted, it is turned on and after the finger is removed, it turns off automatically.
6. HesleyPulse Oximeter (SpO2) Blood Oxygen Saturation Monitor
The oximeter by HesleyPulse is clinically tested and consistent. It gives accurate and reliable reading and is ideal for oxygen and pulse readings.
It is made up of high-quality materials and components. The OLED screen is large and displays the readings. The inner chamber is made up of anti-slip silicone material which is anti-allergen.
While taking the measurements, the readings given are stable against the motion. Even if the button is pressed again during measurement, the reading does not get affected. If the signal is extremely low then also it can record the reading.
This device is water-resistant. In case the SpO2 and Pulse rate are lower than the set limits, the device warns you by an auditory alarm.
If the device does not detect the finger for 6-8 seconds, it turns off automatically.
Along with the device, you get 2 AAA batteries, a carrying case, and a lanyard.
7. Dr Vaku Swadesi Pulse Oximeter
Dr Vaku pulse oximeter provides the SpO2 and pulse rate of a person. It is known for displaying flexible and professional measurement when the finger of the user is placed in it.
With a large digital LED display, the user can read the results clearly and in multiple directions.
Due to rotatable multidirectional display, the results can be viewed in any direction.
It works on 2 AAA batteries which are included in the package and can be operated continuously for more than 20 hours.
If there is inactivity in the oximeter for 10 seconds, it switches off automatically.
Due to its compact size and lightweight, it is easy to carry and easy to use.
8. Dr. Odin Pulse Oximeter
As one of the most prominent health and wellness brands, products of Dr.Odin are used worldwide.
Dr.Odin pulse oximeter can be used to record oxygen levels in the blood. It gives accurate readings like SpO2, pulse rate, and perfusion index within 10 seconds. Due to ease in getting accurate readings, it is widely used in homes, community centers, and medical institutes.
It has four direction modes which are also helpful in the proper functioning of the pulse oximeter.
When it is not in use, it shuts down as it is equipped with the feature of auto power off.
The readings are displayed clearly on an OLED display. This pulse oximeter is operated with one button only which makes it highly efficient and effective.
While using, when you get the proper readings, the alarm beeps indicating the time to pull out the finger. It is user-friendly with a simple interface.
9. MediWeave Fingertip Pulse Oximeter
MediWeave fingertip pulse oximeter is used to measure oxygen saturation level in the blood through a non-invasive and painless method.
It can give the readings in just 6 seconds and has a sound reminder function while showing the reading.
Due to its small size and lightweight, it is easy to carry and has a detachable lanyard due to which the oxygen saturation can be measured anywhere.
The LED display is 1.1 inches which shows the results clearly. The screen is horizontal which makes it more user-friendly. Even if the environment is dark or dazzling, the user can read the readings clearly due to the presence of 3 levels of brightness. To know the readings, you just have to clip it on your finger and press only one button.
Due to the feature of Auto shut off, it switches off automatically if the finger is not detected within 8 seconds.
Buyer’s Guide for Best Oximeters in India
Due to the current pandemic going on, oximeters have become an imperative device and therefore, it is essential to select the right one. There are a lot of devices available and choosing the best among all is tricky and confusing. We are here to help you based on our research and recommendations from medical experts. There is a set of criteria which when followed, helps you in shortlisting the best oximeters in India.
1. Specifications and features – Some features need to be considered like low battery function, alerting system to indicate high and low readings, and measuring of perfusion index. With all these features, the oximeter becomes effective and user-friendly.
2. Pricing – You should be very vigilant in spending your hard-earned money. An oximeter is a little expensive product and it should be of good quality so that the price is worth buying it.
3. Warranty – Since during emergency cases, an oximeter is used and is expensive also. Thus, it is of utmost importance to check for the warranty policy of the product. Always prefer to buy that oximeter that has at least 6 months of warranty by the company.
4. Customer review – Even if the oximeter has all the features and specifications but is not able to satisfy the customers, it is not a good product. You should consider that oximeter which has good customer reviews.
5. Complaints – While selecting a product, an important role is played by the complaints and critical feedback. By going through these you get an idea about the way the company fixes them. The product with minimal complaints is indicative of smooth usage in the long run.
6. Service quality – While selecting the product, service quality should be observed. With high-quality service, the user experience becomes good. Thus, go for the brand that provides high-quality services.
Do you suffer pain while using a pulse oximeter?
An oximeter is a non-invasive device which means it does not go inside the body. It is placed on one of the fingers of our hand and measures SpO2 while being in contact with your body. Thus, it does not cause any pain.
What is a normal pulse rate on an oximeter?
An oximeter is used to measure the blood oxygen level that is SpO2. The pulse rate between 95 to 100 percent is considered to be within the normal range.
How does a pulse oximeter work?
It is used to measure the oxygen saturation level in the blood. When the heart contracts, blood pumps out to the finger. In the resting phase of the heart, blood travels to the heart from the finger. This difference is the velocity measures the oxygen saturation in the blood.
How can we use a pulse oximeter?
For getting an accurate reading on your oximeter, please follow these steps. Take the oximeter and place it on any finger but the preferred one is the index finger. Start the button and wait for a few seconds. Normally, a good oximeter takes 6 to 10 seconds to show the reading. This will indicate your blood oxygen level or SpO2. After noting down the oximeter, remove the device. It switches off automatically when no finger is detected for 6-8 seconds.
All the above-mentioned oximeters can be used comfortably by mountaineers, hikers, sportspersons, healthcare professionals, and households. These are advanced and superior quality products available in the market. I hope this article will be able to answer all your queries about oximeters. Let us know which oximeter seems reliable and good to you. Take care and be safe!